Gard'nClean Fast Release
-
Gard'nClean 1K for use in areas up to 1000 cu ft.
-
Gard'nClean 2.5K is for use in areas up to 2500 cu ft.
-
Gard'nClean 4K is for use in areas up to 4000 cu ft.
-
Gard'nClean 10K is for use in areas up to 10,000 cu ft.
Gard’nClean is a powerful weapon against the spread of Covid-19. Now, every night, a business can be disinfected to help protect staff and customers alike. Users are responsible for evacuating the targeted area of all people and pets. ClO2 can be harmful if it is inhaled or comes into contact with the eyes or skin. Users are also responsible for properly ventilating the area after using Gard’nClean, ensuring the space is not reoccupied until the chlorine-like smell has dissipated. Ventilation is varied for each space,and allowing adequate time for ventilation is vital to the proper use of Gard’nClean. Gard’nClean is not responsible for harm caused by the misuse of our product.
Gard’nClean and REACH TECHNOLOGIES cannot be held responsible for any deaths, illnesses, diseases or any other side effects that are caused by ClO2 contact as a result of advice on this site or through the use of our product other than as specifically directed on our products.
Finally, the owner, authors, advertisers or anybody else associated with Gard’nClean and REACH TECHNOLOGIES are not responsible for any injury or damages (as listed above) that result from advice given on this site.
Please sanitize safely.
Directions For Use:
-
Turn off lights and close blinds as Chlorine Dioxide (ClO2) is photoreactive
-
If treating individual rooms, seal off the room to prevent the gas from exiting the room.
-
If possible, use Gard’nClean GC liquid at 100ppm to spray down all surfaces in the room before using Gard’nClean Fast Release. (The evaporation of the GC Clean Liquid acts as an additional fumigant, resulting in an entourage effect.)
-
Place the Gard’nClean Fast Release in the center of the room, as high up as possible. The ClO2 gas will disperse throughout the entire room. ClO2 is heavier than air, so do not place it under tables or any obstructions. We recommend using fans to help keep the ClO2 dispersed evenly throughout the space. If treating all areas on a shared HVAC system, you can place the Fast Release by the return and allow the HVAC system to disperse the gas into the environment.
-
Remove Foil pouch from jar, remove Gard’nClean Fast release sachet from the foil pouch without tearing the sachet.
-
Place Gard’nClean Fast Release sachet in the provided jar and fill with approx 175 ml of water (to the fill line)
-
Leave room immediately and stay out of room for a minimum of 4 hours.
-
Ventilate room for at least one hour before returning without PPE.
-
Upon re-entry dispose remaining liquid in the container down any drain and discard sachet into any trash receptacle.
Gard'nClean Resources
Gard'nClean Fast Release Overview
Gard'n Clean Fast Release Safety Data Sheet