Gard'nClean Liquid
Gard'nClean Liquid
Gard’nClean is a powerful weapon against the spread of Covid-19. Now, every night, a business can be disinfected to help protect staff and customers alike. Users are responsible for evacuating the targeted area of all people and pets. ClO2 can be harmful if it is inhaled or comes into contact with the eyes or skin. Users are also responsible for properly ventilating the area after using Gard’nClean, ensuring the space is not reoccupied until the chlorine-like smell has dissipated. Ventilation is varied for each space,and allowing adequate time for ventilation is vital to the proper use of Gard’nClean. Gard’nClean is not responsible for harm caused by the misuse of our product.
Gard’nClean and REACH Technologies cannot be held responsible for any deaths, illnesses, diseases or any other side effects that are caused by ClO2 contact as a result of advice on this site or through the use of our product other than as specifically directed on our products.
Finally, the owner, authors, advertisers or anybody else associated with Gard’nClean and REACH Technologies are not responsible for any injury or damages (as listed above) that result from advice given on this site.
Please sanitize safely.
Proper PPE:
Eye Protection
Chemical Respirator
Gloves
Generate the GC Liquid solution with the provided GC Liquid packet by adding packet to water for a minimum of 2 hours, maximum of 12 hours, in a sealed container. Since we are generating gas in the water to achieve the solution, we must keep it sealed to prevent gas escaping. You can generate the GC 30 in either 30 gallons of water to make 30 gallons of ready to use 100 ppm solution, or in 6 gallons of water to make a 500 ppm stock solution. If making the 500 ppm stock solution, please refer to the dilution chart for concentrations and use rates in ml/gal. We recommend transferring the stock solution to a 6 gallon/24-liter opaque nutrient container for easy use. The solution will stay pH & ppm stable for at least 2 weeks. Remove used GC Liquid Sachet from the mixing container and discard in standard trash receptacle. Turn off HVAC and any air exchange, and then seal off room to prevent gas escaping. Turn off lights, as Chlorine Dioxide is photoreactive. Use 100 ppm solution to spray down all surfaces. To make a 50 ppm solution for cleaning irrigation lines /dosatrons/emitters/etc. mix equal parts water and 100 ppm GC Liquid solution. Allow GC Liquid solution to sit in lines for a minimum of 4, and up to 12 hours before flushing. Soak emitters and other removable items in a 50 ppm concentration of GC Liquid solution.
Gard'nClean Resources
Gard'nClean Liquid DilutionChart
Gard'nClean 12.5 Gal & 2 Gal Liquid Release Data Sheet
Gard'nClean 30 Gal Liquid Release Safety Data Sheet